WP XPLOR Fork Valve Kit 2018 models onwards - No Shims

WP XPLOR Fork Valve Kit for 2018 and later models

NO SHIMS - this kit is designed for those who want to make their own shim stacks

Made from 7075 aluminium. Hard anodised.

The DFX off-road XPLOR valve kit is a complete replacement valve kit for the WP 48mm Open Cartridge XPLOR forks. This kit converts the non-damping efficient, asymmetric XPLOR forks to symmetric forks with compression adjuster on the bottom of each fork and rebound at the top of each fork.

All this adjustment enhances overall ride quality and stability to the motorcycle for all terrains.

The kit comes with a complete base valve, rebound valve, needles and hydro stop. Reminder: shims not supplied. For complete kit go here >>

• Base valve with 40 clicks that controls the compression giving a vast range of adjustability.
• 3 ports high-flow compression valve made in 7075 hard anodised aluminium, that comes assembled with shims
• 3 ports high flow rebound valve (mid-valve) made in 7075 hard anodised aluminum
• Rebound holder, and needles that increase the rebound adjustability range
• Hydrostop to equalize the pressure inside of the cartridge.

FITS BIKES:

Sherco owners please note. If your bike is not listed here it might be in the 2017 and earlier list.

Husqvarna 701 ENDURO 2020
Husqvarna FE250 2019-2020
Husqvarna FE350 2019-2020
Husqvarna FE450 2019-2020
Husqvarna FE501 2019-2020
Husqvarna TE150i 2020
Husqvarna TE250i 2019-2020
Husqvarna TE300i 2019-2020
KTM 125XC-W 2019
KTM 150EXC TPI 2020
KTM 150XC-W 2019
KTM 250EXC TPI 2019-2020
KTM 250EXC TPI Six Days 2019-2020
KTM 250EXC-F 2019-2020
KTM 250EXC-F Six Days 2019-2020
KTM 250XC-W 2019
KTM 300EXC TPI 2019-2020
KTM 300EXC TPI Erzberg Rodeo 2020
KTM 300EXC TPI Six Days 2019-2020
KTM 300XC-W 2019
KTM 350EXC-F 2019-2020
KTM 350EXC-F Six Days 2018-2020
KTM 450EXC-F 2019-2020
KTM 450EXC-F Six Days 2019-2020
KTM 500EXC-F 2019-2020
KTM 500EXC-F Six Days 2019-2020
KTM 690 Enduro R 2019-2020
Sherco 300 SE-R 2020